Author Archive: Eric Fritzius

Owner/operator of Mister Herman's Publishing Company and Mister Herman's Production Company, Ltd. Author of A Consternation of Monsters, available in print, ebook, and audiobook formats.

TARDIS Collector’s Corner: Kurt Adler Doctor Who TARDIS LED Lighted Tree Ornament

(An ongoing writing project in which I catalog and quantify my extensive TARDIS collection.) 

This is the second of the Kurt Adler TARDIS ornaments that I own.  This one’s made o’plastic instead o’glass.

It’s your basic TARDIS design, Matt Smith/Capaldi era TARDIS.  The Christmasy bit of it–beyond it being a Christmas ornament to begin with–is that when you flip a switch on the bottom its windows light up with LED lights that cycle through a number of colors, from yellow to green to blue to purple to red, etc.  Kind of neat.

My major complaint about this model, however, is that while the sculpt is basic but good, it’s kind of cheaply made.  Mine has molding flaw lines in the plastic itself.  And while the windows have a lovely silver paint job on their framework, the company didn’t see fit to add any paint detail to the roof lamp, let alone an actual light within it.  Still, it also wasn’t very expensive.

These days this model is not as easy to come by.  There are newer editions of this ornament with fake snow in the sculpting and others with a dumbass Santa hat glued to the top, which just violates… I don’t know… good sense, or something.  They’re also pretty cheap, but I’m still against them and will have no part of them.  This ornament, however, I’m okay with, flaws and all. 

Still only gonna give it three TARDI, but it’s not out of meanness.

The Last Archer

My latest effort as an audiobook narrator, The Last Archer, by S.D. Smith, is now on sale.  It is set during the events of Smith’s Green Ember series, but tells a side story to those events with some new characters and a few familiar faces.

You don’t have to have read the Green Ember series to enjoy this story of rabbits with swords (or, as is often the case, bows), but I recommend you read them anyway cause they’re great. (Or pick up the audiobooks for those, narrated by Joel Clarkson.)

New production

I am pleased to announce that my short play “Fargo 3D” will be produced as part of the 10×10 Play Festival at Barrington Stage Company in Pittsfield, MA.  The festival will run February 15-March 4, 2018.

This will be Fargo 3D’s first production north of the Mason-Dixon.  I hope to attend.

TARDIS Collector’s Corner: The TARDIS Kurt Adler Figural Holiday Ornament

(An ongoing writing project in which I catalog and quantify my extensive TARDIS collection.) 

Back in 2013, I got a wild hair up my butt to order a bunch of Doctor Who stuff from ThinkGeek.com.  Really, what probably happened is that they had a massive sale, the savings for which really kicked in once you ordered multiple items so I went down my wish list and picked out a few.  Naturally all of mine were TARDIS-related and will likely be chronicled here one day.  But of the two holiday-related TARDIS items among my purchases, the TARDIS Figural Holiday Ornament was one of them.

As far as Christmas ornaments go, this one is fairly standard.  It’s a hollow glass TARDIS, lovingly reproduced in the kind of rounded style as many such glass ornaments of other shapes.  This means you can’t go deep on the details, like woodgrain or hard corners, but you can do highlights such as a dusting of blue glitter that gives it that ornament feel without resorting to adding bows and snow, which I’ve seen on some other ornaments.  And that stuff’s fine, but it’s not what I wanted.  I just wanted your basic TARDIS in super fragile ornament glass form and this one’s pretty sweet in those terms.

The same company that made this one, Kurt Adler, made some others, including different Dalek glass ornament designs that Think Geek still has in stock.  They no longer have the TARDIS, but Amazon has it for a very reasonable price.  They give it a nearly five star rating, too, so how can I give it anything less than five full TARDI.

The TARDIS Collector’s Corner: My TARDIS Bluetooth Speaker Lamp

(An ongoing writing project in which I catalog and quantify my extensive TARDIS collection.) 

A few years back I saw a TARDIS lamp on ThinkGeek.com.  I fell in love instantly.  Then my wallet saw how much they wanted for it and I decided my desk didn’t really need a lamp all that much after all.  I was also a bit suspicious of it, because I couldn’t get a good look at it from the pictures.  The angle ThinkGeek took their pictures from made it seem as though the lamp’s center pole came right up through the roof lamp of the TARDIS itself.  I suspected, though, that the pole was actually not centered in the base of the lamp at all, but was off to one side and what I was really seeing was the pole behind the TARDIS, separate from it, yet aligned, intentionally I suspect, in a way that would suggest it came through the center of the TARDIS.  And this was pretty much the only angle photographers of that particular lamp used, and continue to do so to this day.  I also didn’t care for the lamp’s shade and would have preferred a simple Tardis-Blue shade.  Were I ever to acquire one, I would have to remedy that, I thought.  But the price tag on it, of around $45, was the major drawback to the purchase.  I decided to bide my time or come up with another solution.

By this point I had enough TARDI in my collection that I figured I could probably make my own lamp, especially if the retail TARDIS lamp itself was only a display base lamp in the first place.  If I could find one of those, I could just put one the TARDIS of my choice on it and call it a night.  The trouble is, while I can call that style of lamp a “display base” lamp in writing, that’s probably not what it’s really called–or, at least, if you search for that term you’ll see any other kind of lamp than the style I was actually looking for.  After haunting lamp sites and unsuccessfully searching on and off for a few days with various other terms, I gave up.

Three summers ago, while visiting my parents in Mississippi, I popped by a local remaindered store called Dirt Cheap, located in a repurposed former Kroger, across from my old high school.  And there I found a literal pile of display base lamps, pre-painted in a blue color for my convenience, for $11 each.  Granted, the shade of blue was not so much current TARDIS blue, but was more of a Sylvester McCoy TARDIS blue.  However, I was the owner of a Sylvester McCoy TARDIS toy, so it was kind of perfect.  And, I figured, if it was ever important for it to be any other hue of blue, they ain’t quit making Krylon.   I took it home with me and plunked the Sylvester McCoy TARDIS onto it at my earliest convenience.  It was a great fit.  In fact, I found that if I substituted the David Tennant era Flight Control TARDIS, it actually hung off the edge of the base a little, while the smaller McCoy TARDIS did not.

Jump ahead some months.  That sultry temptress ThinkGeek.com once again began whispering sweet nothings in my ear by adding a TARDIS bluetooth speaker to their stable of nerdy ‘ho’s.  (She was paired with a bluetooth Dalek speaker `ho as well.)  However, it was a bluetooth speaker TARDIS that cost well over $100.  No dice.  Not unless it was made by Bose would I spend that kind of cash on a single speaker.  I saw it offered on other sites for a bit less, but it was still just dumb.

A year later, though, Amazon ran a special.  You could get the TARDIS bluetooth speaker and a blue ray of all the Christmas specials to date for under $70.  That seemed about right, especially considering the good ratings the speaker seemed to be getting.  I snatched it up, punked it down on the display base, and instantly had my very own, possibly one-of-a-kind, bluetooth TARDIS speaker lamp.

The speaker itself is indeed a good one.  It’s not going to fill a room with sound for a party, but it’s fantastic for playing music or podcasts that don’t have to be floor to ceiling.  It’s portable,rechargeable, and it lights up and makes TARDIS sounds.  When you first turn it on, it does the TARDIS takeoff sound in time with the flashes from the roof lamp.  You can skip this by hitting the volume button, cause it goes on kind of a while.  It then makes strange whooshing sounds and flashes the Police Public Call Box lights as it searches for a bluetooth connection.  When it finally gets one, it sounds the cloister bells (proving that bluetooth connections are a danger to the space-time continuum), turns the Police Public Call Box signs on solid and you’re good to go.

As far as its design goes, the speaker TARDIS is pretty darn good in almost all respects.  It’s of a comparable size to the Tennant TARDIS, so it does hang off the edges a bit, but I can live with it.  While it has woodgrain sculpting on most of the usual surfaces (roof, door edges, base, etc., all going in the proper direction) it is oddly lacking in woodgrain sculpting on the inset door panels.  It’s a questionable design choice and feels like either a move to cheapen production or maybe was intentionally done by a designer who somehow didn’t think the TARDIS had woodgrain in those panels.  The windows are also not “glassed” but are used as the speaker sound ports. (Sound’s gotta come out somewhere.)  They’ve kept the T-shape to the window panes by using the blacked out sections with open slots as the speaker ports.

The lower section of the front has four buttons set two each into the lowest inset panels.  (Ooh, maybe they didn’t put woodgrain in the panels cause it would somehow interfere with the aesthetic of having buttons poking out of those lower ones?)  Two are volume buttons while the other two are a pause/play button and a phone button in case calls come in while it’s connected to your phone.  So the speaker then becomes a speaker phone (which, while I’ve never actually used it for this purpose, makes the 14-year-old me from 1986, who was fascinated by speaker phones after seeing the character Cameron use one in Ferris Bueller’s Day Off, very very happy).

If I had a complaint beyond the woodgrain thing, it’s that when the TARDIS speaker eventually runs low on its charge it emits a crazy-loud and very non-Doctor-Whoish alarm sound to warn you that it will soon need a charge.  The first time this happened, though, I was at a complete loss for why it was happening.  It was VERY startling and then, as it continues every few minutes until you finally plug it in, remained irritating because it’s a full stop interruption to whatever you’re trying to listen to.  I understand the need for such an alert, but I don’t understand why it has to be so jarring.  There are dozens of quieter little sounds the TARDIS makes on the show that would be more appropriate.  Even the cloister bell sound would make more narrative sense, as the bells are intended to be a dire warning in the first place, and what would be the worst thing that could happen to a rechargeable speaker–beyond getting dropped in the toilet, or something.

These days, the TARDIS bluetooth speaker is far more affordable, being available for around $50 online.  If you’re in the market for one, I recommend it.  In fact, I give it four TARDI.

The TARDIS Collector’s Corner: The TARDIS USB hub

(An ongoing writing project in which I catalog and quantify my extensive TARDIS collection.) 

The TARDIS USB hub is one of the more useful TARDi in my collection.  And one of the handiest, as it’s always there on my desk, faithfully being all TARDISy and stuff.

As far as USB hubs go, it does the trick, having four ports, two on each side allowing me to plug up to four USB cabled devices into my computer via the single cable running from the hub to one USB port on the actual desktop unit.  As ya do.  But adding to the rollicking fun of all that, the optional cool bit is that when you plug a USB cable into one of the ports on the TARDIS hub, it not only flashes the roof lamp, but also plays the TARDIS wheezy takeoff noise.  Huzzah.  Or, if you’re somehow sick of hearing the TARDIS wheezy takeoff noise (you deluded monster!) you can flip a switch on the back of it and it shuts up (though it still flashes the light).  For those who are not sick of hearing the TARDIS wheezy takeoff noise, though, another feature allows you to press the door sign on the left, which serves as a button to play the noise and flash the lights.

As far as styling goes, the hub is middle-grade in the detail department.  It checks all the boxes on shape and proportion and signage of your standard Matt Smith-era TARDIS, with a very respectable roof lamp, and painted door hardware, including the keyhole.  However, there is no wood-grain to be found.  This is actually fine by me.  I’d rather there be no wood grain than shitty wood grain.  (Still lookin’ at you, Light Up TARDIS “kit.”)  I give it a solid four TARDI.

A side story to the above picture: a few years back my sister gave me a mug very much like the one pictured beside the TARDIS hub.  It is a mug of the sort that when you pour hot liquids into it the TARDIS on one side vanishes and reappears in outer space on the other side.  Trez cool.  Only trouble is, it comes with a number of notices and stickers warning you to never ever EVER put it in the dishwasher.  And I never ever EVER did.  However, while emptying our dishwasher one day, what should I find but my mug within it, sans any illustrations.  I was sad to have lost all the TARDISy bits of my TARDIS mug, but figured it had been a mistake made by our cleaning lady, who had not been given the memo on the washing of the mug.  Later I mentioned it to the wife, whose eyes shot wide.  I could see within them the guilt reservoir beginning to rise.  Yep, she’d been the culprit the whole time.

We made the original, now blank mug, a new receptacle for pens.  But since my sister was coming for a visit a couple of months later, I decided to get a replacement mug so she wouldn’t feel bad and so I would have a TARDIS mug again.  Then I went and told her the story anyway, cause it was funny.  These days the mug lives on my desk, far away from any dishwasher, and is used as another receptacle for pens, its dematerialization circuits temporarily at rest.

 

 

The TARDIS Collector’s Corner: “Doctor Who – Wind up Tardis”

(An ongoing writing project in which I catalog and quantify my extensive TARDIS collection.) 

I wish I could say the “Doctor Who – Wind up Tardis” was given to me as a gift.  If it had been, I would feel an obligation not to insult the person who gave it to me by taking a dump on it over the course of 1000 words and just write something like “Boy howdy, it sure does wind up.  Look at it go.”  Then I’d slap a two or three TARDI rating on it and call `er a day.  I wouldn’t have to dwell on any of its super-obvious aspects of questionable quality.  I could just walk away and be the bigger man.  But, no.  I bought this thing with my own money and of my own free will and have no one to blame but myself.

As I mentioned before, I try very hard not to buy crappy TARDISes, but sometimes it happens anyway.  In this case, I’m pretty sure I bought it sight unseen from my comic book mail order service after having seen it in a thumbnail image on their online catalog three months previous.  When it arrived and I was able to cast actual eyes on it, I could immediately see the error I had made.

Much like its dumpy cousin, the Doctor Who: Light-Up Tardis “Kit”, the The Doctor Who – Wind up Tardis is solidly lame.  They could almost be mistaken for one another, except that “wind up” is slightly larger than “kit.”  They both, however, have the out-of-scale over-sized wood grain sculpting.  Where “wind up” improves on it, though, is that the wood grain sculpting on the roof panels is actually parallel to the roof edges.  Beyond that, they both have the same painted on windows and the non-recessed Police Public Call Box signs.  Curiously, the creators of the “wind up” TARDIS didn’t even try to get the roof lamp at all accurate.  It’s just a chunky cube of clear plastic with some blue paint daubed on the top of its semi-sculpted cap.  It’s like they got the base of the lamp and the cap of the lamp then just threw a cube of plastic in between.  And it doesn’t light up.

Where the “wind up” TARDIS distinguishes (extinguishes) itself, however, is in its ability to roll and spin when wound up.  (Y’know, like how TARDISes do on the show all the time?)  It has four wheels on the bottom which may be wound by rolling them backward (“backward” being difficult to determine without experimentation, since the wheels are, as designed, free-moving within a disc that rotates as the wheels spin, so they are therefore always facing a different direction than “forward”).  Once wound, you can then release the TARDIS and watch it roll a couple of feet while at the same time spinning kind of slowly, as you can see in the video below.

 I guess this spinning is meant to simulate the TARDIS spinning through space, cause it’s not like the vehicle is known for spinning along the ground.  In its defense, the TARDIS is also not known for, say, holding cookies, salt, coffee, liquid soap, a Yahtzee set, your head, or for wrapping you up in a snuggly embrace either, all of which are things some of the TARDISes in my collection are frequently called upon to do.  This being the case, I suppose I shouldn’t really complain about a TARDIS spinning along the floor–particularly a product called “the Doctor Who – Wind up TARDIS”, a fact that I was aware of in advance of its purchase.

I still give it two TARDI, cause its overriding lameness just annoys me.

The TARDIS Collector’s Corner: Fascinations Metal Earth Doctor Who Tardis 3D Laser Cut Model – Blue

(An ongoing writing project in which I catalog and quantify my extensive TARDIS collection.) 

Having been kicked in my TARDIS junk (insert customary “bigger on the inside” joke here) by the non-kit, fully-assembled, have-but-to-flip-a-switch-and-yer-done nature of The Doctor Who Light Up TARDIS “Kit” I was pleased, a few months back, to discover on Amazon a new kind of TARDIS kit that actually required assembly.  The Fascinations Metal Earth Doctor Who Tardis 3D Laser Cut Model – Blue might be a mouthful to say, but it looked amazing in the pictures and claimed that its pieces were all die cut in two layers of sheet metal which you, at home, could assemble.  Sounded delightful.  And, eventually, I ordered it.

The kit arrived shortly.  I was somehow expecting a box, but it arrived in a thick cardboard envelope containing two sheets of thin metal, indeed die cut and pre-painted with TARDISy details, as well as an instruction sheet.  I laid those three items on my desk and was taken aback by the fact that the size of the pieces did not match up to my assumption of how big this thing was actually going to be–or, rather, how small.  It’s hard to get scale off a manufacturer’s picture, and I had assumed that the kit would produce a TARDIS that was probably in league with the Sylvester McCoy TARDIS, or maybe the TARDIS Yahtzee set at smallest.  Nay, nay.  The product dimensions might have listed it as being 6″x4″, but what they really meant was the package it came in was a flat 6″x4″ envelope.  Eyeballing the size of the tiny TARDIS doors within their sheet metal framework, it appeared this TARDIS would be closer to 3 inches in height than 6″.  Still, it was an amazing piece of engineering and the end-results, as per the photograph, were impressive.  I started reading over the instructions and prepared to begin my kit assembly.

After less than a minute, I lay my instruction sheet down atop the intact sheet metal sheets and became distracted by doing anything else.  For what I had swiftly realized was that this assembly wasn’t going to be a quick matter of popping the pieces out and quickly sticking them in place, like the old snap together model car kits.  Nay, nay, nay.  This was going to require tiny tools I wasn’t sure I possessed as well as a pair of 250 strength reading glasses.  Because it turns the kind of exacting detail I tend to demand from my TARDIS purchases also require a similarly exacting level of detail in terms of the number of, often, tiny tiny parts in order to achieve it.

Now keep in mind that I am a guy who is not afraid to go to such levels of detail.  In college, I was known in certain circles for my ability to paint micro-details onto tiny half-inch pewter figurines for our role-playing games.  But that was 25 years and a pair of bifocals ago.  I did want to assemble my TARDIS, and planned to eventually do so, it was just a matter of finding the time.

So the kit lay for the next two months or so.

Occasionally, I would pick up one of the sheets and stare at it, marveling at the kind of engineering it must have taken to be able to create a believable looking 3D TARDIS roof lamp and housing out of flat metal.  Brilliant.  Then I would move the whole thing to a flat surface where it was less-likely to have papers piled on top of it or bent up by a dog and there it sat for more weeks.

This past Monday, the wife’s day off, a mere week after having penned the entry about my shitty Light Up TARDIS “Kit”, I got a wild hair up my butt to finally put my tin TARDIS together.  I gathered the sheets of metal from my desk, found where I’d temporarily lost the instructions, and headed downstairs for what I was certain would be two hours of frustration and frequent cursing.

“I’m going to put my metal TARDIS kit together,” I announced for the dogs and wife to hear.

The wife put down the book she’d been reading and said, “Ooh, what if I put it together instead?” And I knew she was serious because she both loves putting things together and also had thirty medical charts she didn’t want to work on.

“Okay,” I said.

Now this might seem an odd thing for a fellow who spent the better part of 900 words complaining about a TARDIS kit that didn’t allow him to put anything together to say.  However, what I had long since come to realize is that my desire to have a cool-looking metal TARDIS, fully assembled and on display in my collection had outweighed my desire to actually put such a thing together myself.

“Are you sure?” the wife asked, fearing she .  “You don’t want to do it?”

“Well, I wouldn’t mind doing it, but I also wouldn’t mind if you did it,” I said.

The wife set her book down and set to work on the TARDIS.  Turns out we didn’t have exactly the ideal tools for doing the job, but between my small tool set and her jewelry making tools we had approximations.

Each of the pieces that make up the TARDIS come as part of one of the two flat sheets of metal and have to be removed.  This can take some doing as the metal is shockingly easy to bend in places you don’t want it bent.  (In fact, I accidentally dropped one of the sheets as I was trying to remove a piece and in my effort to catch it I wound up bending it across several pieces.  Oops.)  As such, the manufacturer, Fascinations, saw fit to include doubles of some of the smaller and more easily damaged pieces. The pieces often require folding and sometimes tab and slot fastening to other pieces (and by tab and slot I mean millimeter sized tabs and slots in some cases). For instance the roof section above the POLICE signs is composed of at least 9 separate pieces in order to get the details of the roof approximate to the real thing.  Fascinations could probably have gotten away with skimping on some of these details, but they do not.  In all aspects, this is a folded metal version of the TARDIS, down to the wood grain on the roof (which is to scale and is oriented in the correct direction).  The POLICE PUBLIC CALL BOX signs are all properly recessed, the corner columns look right, the mirror finish windows have a T-shape formed by four of the panes, which are a slight shade of blue, the phone door sign looks correct, and both doors even open.

All in all, she said it was a very challenging and there were some pieces she asked me to help remove from the framework, mostly because there were four of them (the caps to the corners) and removing them was a pain in the ass.  I gladly assisted whenever asked.  She also apologized later, for in her assembly she’d managed to scratch a couple of the surfaces.  I told her it didn’t matter, cause to me the TARDIS is supposed to look a bit banged up.

This is a fantastic kit.  Even if I’d had to assemble it all myself, the challenge of it alone would have made the end result (which is a great TARDIS rendition) well worth it.  It was even better, though, that I didn’t have to do all that.  If you’re looking for a snap together kit, or a kit that a small child could manage, this is not your kit.

Fascinations makes a number of other Doctor Who related kits, including K-9, a Cyberman head, and a Dalek.  But they have a number of other licensed properties, including Star Wars, Batman and Harry Potter.  They’re all pretty cheap, too.

I give it a full five TARDI.

Win a FREE audiobook for A Consternation of Monsters

I’ve teamed up with Audavoxx.com to give away a free copy of the audiobook for A Consternation of Monsters.

Find all the details at the link below.

AudaVoxx is a great service for those who buy audiobooks with their Audible subscription credits, as well as those folks who enjoy entering to win free audiobooks, as well as those who enjoy buying them outright.

Sign up for their weekly newsletter.  What you’ll receive: a single newsletter every Thursday morning, with a hand-picked, top-rated audiobook for each of the six genre categories we represent. They’ll highlight a mixture of new and old as well as traditional and independent audiobooks.

Find all the details about the A Consternation of Monsters giveaway at Audavoxx.com.

TARDIS Collector’s Corner (Future Timey Wimey Edition): The 13th Doctor’s TARDIS

Thursday nerd media online has been blazing with a single photograph, one that revealed Jodie Whitaker’s costume as the 13th Doctor in next year’s new season of Doctor Who.

For the most part, I’m okay with it, and certainly like the trouser braces she’s sporting.  Love the coat.  Love the boots.  Like the basic color scheme.  Not real big on the stripey stripe on the shirt, but I’m sure she’ll change her shirt once in a while.  It’s not like Capaldi kept his first season coat he whole time either.

But what really caught my attention was her version of the TARDIS, as seen in the background.

I’d read that it was getting a redesign beyond the traditional new Doctor interior, and had been curious what would be done to it.  Would they paint it a girly color just to piss off the fanboys who don’t like that the Doctor shall be a Time Lady now?  Well quite the opposite, in fact.

The new TARDIS looks more like the old TARDIS, and by that I mean the old old TARDIS from the later days of Tom Baker’s era.  Gone is the St. John’s Ambulance badge.  Gone the pebbled glass T windows.  This is a proper back-to-basics, no dumb glowy door sign, grim-n-dingy-`70s blue old school TARDIS.  The door sign has even reverted to the dark background of ’70s and ’80s show prop.

I look forward to purchasing the toy version of it and have fingers crossed that they take all the great aspects of the 10th Doctor’s Flight Control TARDIS and marry them to the new design, leaving out the questionable bits of more recent TARDIS releases, as yet to be reviewed here.

So far, I give it Five TARDI.